Model |
JV33-260 |
Head |
Piezo-electric drop-on demand, 180 nozzles x 8 lines x 1 head |
Maximum printing width |
2,632mm (103.6") |
Print mode |
540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi |
720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi, 720 x 1,440dpi |
1,440 x 1,440dpi |
Ink |
Type |
Solvent ink: ES3 and HS |
Aqueous pigment ink |
Aqueous dye sublimation ink |
Capacity |
4-colour mode: 440cc cartridge x 2/colour = 880cc/ colour |
6-colour mode: 440cc cartridge x 1/colour = 440cc/ colour |
Media |
Size |
2,642.mm (104.0") |
Roll weight |
Less than 100kg (220lbs) |
Print Surface |
Face out |
Roll inside Dia. |
2 inch or 3 inch |
Cutting of medium |
Cutting in Y direction by cutter at the head |
Media heat |
Triple stage intelligent heater (Pre/Print/Post) |
Media take-up device |
Roll take-up device (standard), inside/outside selectable |
Interface |
USB 2 |
Applicable standards |
VCCI Class A, FCC Class A, UL 60950 |
CE Marketing (EMC directive, low voltage directive) CB report |
Power |
AC100~120V±10%, AC220~240V±10%, 50/60Hz±1HZ |
Power consumption |
Less than 1,4440 VA x 2 plugs |
Operational Environment |
Usable temptation: 20ºC ~ 35ºC (64~95ºF), Humidity:35~65%RH (No condensation) |
Dimentions |
W=3,650mm (143.7") x
D=739mm (29.1") x
H=1,424mm (56.1") |
Weight |
450kg (992lbs) |